JMT Full Set With FPV Goggles Falcon-220 220mm DIY FPV Racing Drone Quadcopter BS430 30A ESC F4 Pro V2 Flight Control 1200TVL Camera FS I6 TX. Soldered, with FC ESC Motor ESC Soldered, need assemble. Due to the production batch, some accessories may be somewhat different, but it does not affect the function.Partweight: (Basic version 752g Standard version 1441g Upgrade version 2259g High version 2609g). Flight Control: OmniF4 Pro (V2) flight control. ESC: 30A 3-6S 4 in 1 BLHeli-S firmware Dshot ESC.
Battery/power supply; 11.1V 1500MAH 40C XT60 plug lithium battery. Flight time: about 10 minutes (the specific flight time depends on the movement of your flight). Figure: 48CH 5.8G picture transmission 25/100/200/400mW OSD frequency modulation. Camera: 1200TVL black 2.1mm PAL system.
Remote control: Fuss i6 air stability distance 700M (actual control distance is related to the environment) / outdoor flight. Betaflight F4 Pro (V2) Flight Control Built-in OSD / BEC Hardware parameters: STM32 F405 MCU MCU Barometer BMP280 The six-axis sensor MPU6000 uses an SPI connection Standard SD card slot MCU through the SPI bus DMS mode control OSD chip, faster Built-in power module BEC, no external, easy to use. BS430 Blheli_s 3-6S 4in1 ESC 4x30A OmnibusF3 F4 Fly-tower. BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmware. Only 36x36mm, mount holes 30.5x30.5mm M3.
Compatible for F3 F4, easy to assembly a Fly-tower with it. 1x11.1V 1500MAH 40C XT60 Battery. The item "Full Set With FPV Goggles JMT Falcon-220 DIY Racing Drone BS430 ESC F4 Pro" is in sale since Tuesday, June 23, 2020. This item is in the category "Toys, Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Other RC Parts & Accs".
The seller is "wi-model" and is located in . This item can be shipped worldwide.