New Electric Full

JD Squared BR-23E Electric Bead Roller Full Setup

JD Squared BR-23E Electric Bead Roller Full Setup
JD Squared BR-23E Electric Bead Roller Full Setup
JD Squared BR-23E Electric Bead Roller Full Setup
JD Squared BR-23E Electric Bead Roller Full Setup
JD Squared BR-23E Electric Bead Roller Full Setup

JD Squared BR-23E Electric Bead Roller Full Setup    JD Squared BR-23E Electric Bead Roller Full Setup
JD Squared BR-23E Electric Bead Roller Full Setup. US made heavy duty bead former with a 23 throat depth allowing beads, steps, tipped and wired edges to be formed into steel up to 1.2mm and aluminium up to 1.6mm. 1 diameter shafts run in 4 bronze bushings and the upper shaft has fore and aft adjustment for centering rolls and adjusting step die angles. Comes complete with an adjustable backstop. Comes without tooling which is available in the following shapes.

90 degree Step Roll (Joggle). 3 Stage / 3 Pair Wired Bead Kit. 3 Stage / 3 Pair Safety Edge Kit.

230v Motor upgrade kit designed and built in-house at Stakesys as a 15 minute bolt on upgrade to convert your manual BR-23 bead former to an electric machine. The kit replaces fits onto the lower drive shaft via a cush drive and is adjustable in 3 directions for perfect alignment. Power comes from an 230v / 250w (1/2hp) induction motor which is almost silent in operation. This motor is 5 times more powerful than the noisy Dayton Brush motors found on other machines.

Power in converted from 230vAC to 24DC at the aluminium twin pedal switch where the operator can choose from forward and reverse independently whilst keeping both hands on the work piece. Speed is infinitely variable from 0 rpm upwards and controlled via the dial on the motor housing. All cabling is armour plates for industrial environments and the machine is fitted with an No Volt Release emergency switch.

We found this design far more controllable than the single pedal speed controller systems commonly found on competitor machines where its can be difficult to control speed on slower tricky corner shaping whilst trying to balance on 1 foot and control speed with the other. With our 2 pedal system much better control can be achieved for delicate operations and then sped up on the dial for long straight shaping lines.

Powerful enough to bead 1.2mm mild steel. The kit bolts on in 10-15 minutes and full photo instructions are included. 230v / 50Hz fitted with UK 3pin plug. Powder coated fixed position stand and fitting kit (drill bit, chemi fix or rawlbolts, studs & nuts).

The item "JD Squared BR-23E Electric Bead Roller Full Setup" is in sale since Wednesday, June 26, 2019. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment". The seller is "stakesys" and is located in Loughborough.

This item can be shipped worldwide.

  • Country/Region of Manufacture: United Kingdom
  • MPN: BR23E
  • Brand: Stakesys


JD Squared BR-23E Electric Bead Roller Full Setup    JD Squared BR-23E Electric Bead Roller Full Setup