Clean Injection Pro Series Hanger is a drop in design making it a ideal way to upgrade your fuel system without adding any separate tanks or doing any major modifications. Built in fuel level sender bracket allowing the use of the factory fuel level float assembly. 8AN discharge fitting with built in high pressure check valve. Two -6AN fuel return/breather ports.Supports 1200hp on Naturally Aspirated and 860hp on forced induction setups. Anodize coated making it ideal for setups running alcohol base fuels like E85. AEMs 380LPH fuel pump is capable of supporting over 1200HP normally aspirated and a whopping 860 HP at 30 psi of boost! It flows 380LPH (100gph) at 43 PSI, 340LPH (90gph) at 73 PSI, and 270LPH (71gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. Fuel pressure charts are shown below. The AEM 380LPH fuel pump is designed for use with gasoline. Alcohol fuels can be used, but pump life may be diminished. AEM FUEL PUMP VOLTAGE SPECS: Connector Terminal: 6mm stud positive, 5mm stud negative Min Voltage Input: 10 volts Max Voltage Input: 18 volts Current Draw (40 psi): 9.73 amps no check valve, 10.68 amps with check valve (13.5v) Current Draw (120 psi): 16.07 amps no check valve, 17.13 amps with check valve (13.5v) Fuse: 25 amps (13.5v), 30 amps (13.5v) MAX. The item "New MITSUBISHI LANCER EVO 03-07 8-9 AEM in-tank 380LPH FUEL PUMP HANGER KIT VIII" is in sale since Friday, January 13, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps". The seller is "clean-injection" and is located in Acworth, Georgia. This item can be shipped worldwide.