IFlight 5.8G SucceX Micro VTX V2 + Whoop Extension Adapter Mount for FPV Drone. FEICHAO 915MHz Moxon 5dBi Module Antenna for Frsky R9M TBS Crossfire Jumper T16. IFlight 5.8G SucceX Micro VTX V2 PIT/25/100/200mW/300mW Adjustable for FPV Drone. Happymodel EX1203 KV11000 Brushless Motor 1.5mm Shaft CW CCW for 3inch FPV Drone. Happymodel EX1102 KV19000 Motor CW CCW 1MM Shaft for 75mm Whoop Toothpick Drone.Jumper T18 Radio Open Source Multi-Protocol Transmitter 915mHz Remote Controller. 120mm Mini F3 OSD 2S RC FPV Racing Drone Quadcopter 700TVL Camera VTX Goggles 10A ESC 7800KV Brushless 2.4G 6CH BNF RTF Combo Set Assembly. Please Check carefully the pictures when you make order the combo set you want, Difference combo set with different Electronic Configuration. We are waiting to hear from you. JMT Leader-120 120mm Carbon Fiber Frame Kit 1. Mini Tower F3 OSD Flight Control Integrated 10A 4in1 ESC 1. 1103 7800kv Brushless Motor 4. 2840 3-Blades CW + CCW Propellers. Flysky FS-i6 2.4G Transmitter + FS-A8S 8CH Receiver 1. (Some combo set not include the Remote Controller system, Please confirm the combo as your request).
7.4V 2S 20C 400MAH Battery 1. (Some Combo Set not include the Battery). IMAX RC B3 Pro Balance Charger 1.(Some Combo Set not include the Charger). Mini HCF9 5.8G 48ch 25mw VTX Camera Transmitter OSD 1. Mini FPV Goggles 3 inch 480 x 320 Display Double Antenna 5.8G 40CH 1. (Some Combo Set not include the FPV Receiver). Forward/backward, Sideward flight, Turn left/right, Up/down, Hover, Self-stability, Buzzer.
Compatible with Flysky Remote Controller. The aircraft frame is using high-strength drop-resistant carbonfirber/PCB material which provides better resistance to damage on hard landing, durable. We provide the Mini Camera and FPV Equipment together, so that you can enjoy the Aerial photography experience. Simple operation with manuals, do not need to make tedious setup and debugging to the Flight controller, simply assembled to fly.Mini Tower F3 OSD Flight Control Integrated 10A 4in1 ESC, Easy to use, best choice for flight experience. The first perspective of racing flight.
We have debugged and calibrated the flight control and ESC. It is no longer necessary to make complicated settings for the flight control, and it can be assembled simply by flying. Brand: JMT State of Assembly: Assembly/RTF/ARF/BNP/BNF Versions Frame Wheelbase: 120mm. Flight Time: about 4 mins (the specific flight time depends on your flight action).
Item name: Leader-120 FPV Racing Frame Wheel base: 120mm Material: Carbon fiber, PLA Weight: about 18g. Size: 90mm 113mm 30.5mm; Upper Plate Thickness: 2mm; Buttom Plate Thickness: 3mm. When using the charger, please do not simultaneously charge the 2S and 3S batteries on the charger. Do not understand the flight control and remote control, please do not modify any parameters and wiring. Turn on the remote control before powering the aircraft.After the flight is over, unplug the power battery and then turn off the remote control to prevent accidents. This aircraft is not recommended to fly indoors. It is recommended to fly in an open space to avoid flying in places where people and disturbances are present. This RC model is not a toy and is not suitable for children under 14 years old.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult. How to connect the Flight control, GPS, receiver? How to calibrate GPS and flight control?A: They are connected when you open the package. The Flight Control, and Remote Control (transmitter) are calibrated and tested. You only need to follow the instructions to assemble them. Can we use other kinds of Motor and ESC?
If yes, What kinds of Motor and ESC recommend? Can we change the Propellers? A: Of course, we recommend the motor 1106 1306 1407 1506, ESC 10A-20A, 2.5 Inch to 3 inch Propellers. Can I add PTZ and other FPV equipment?
A: Our products can be modified to upgrade, sports camera with gimbal is a good choice. Can RTF (Ready To Fly)? A: Our products default motor, ESC are welding the banana head and ESC and sub-board welding together, do not need your hands-on welding. And Of course you can do RTF. Please message us if you need this service.Can be used with larger capacity battery? A: ESC support voltage in 2-3s, the maximum recommended capacity 500mah. I do not like your remote control, can you change the remote control? A: Yes, replace the remote control, the same set for you all the auxiliary flight mode, but will be little different with the instructions, After setting, we will inform you about the setting information in time. We will mostly brand of remote control and this flight control settings. What kinds of flight environment is applicable to this quadcopter? A: This quadcopter is not suitable for indoor flight, it is recommended to fly outdoors and open areas, but please avoid interference with the crowd and the surrounding areas. Flight Controller Parameter adjustment software. RTF (Assembly) with Camera and FPV Transmitter and Goggles Receiver. With FPV Camera and Battery. But without Remote Controller System (Assembly). And Remote Controller , But Without Battery (Assembly). DIY Drone Kit With FPV Camera But No Battery, No Remote Controller System. The item "Mini F3 OSD 2S RC FPV Racing Drone Quadcopter 700TVL Camera VTX Goggle 10A" is in sale since Thursday, December 6, 2018. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Other RC Parts & Accs". The seller is "fmt-model" and is located in . This item can be shipped worldwide.